Power Pack 3

Power Pack 3

  • $1,049.95
    Unit price per 
  • Save $125
Shipping calculated at checkout.


Looking to make big horsepower without braking the bank or sacrificing quality? We have you covered with the FABbot Power Pack! This Power Pack comes with the VS Racing VSR Next Gen 7875 turbo and a set of 8 Snake Eater Performance SEP 1000cc injectors. These are some of the hottest components to turbo charging any LS today at an unbeatable price! Found only here at FABbot!

Turbo:

The next gen is here and ready to take flight.

The new point milled high flow compressor wheel  78mm

Next gen Turbine housing 1.25 AR T4 divided

Spec
Compressor: 78/102
Turbine: 83/75
Turbine Options:1.25 T4 Divided
Compressor Outlet : 3″
Turbine Outlet: 4″ Vband 
Inlet Flange: T4 divided

Oil Feed fitting 1/8 npt to -4an

Oil Flange Std T4 drain.

Oil Thread Pitch  for flange M8x1.25

 

Injectors:

Price is for Individual Injectors, sets of 4-6-8 will be matched within 1% before shipping!

Full Injector Flow/Offset report included in package and Plug and Play ECU tuning data for all SEP Injectors included with purchase via email request. (Plug and Play ECU data/Injector characteristics provided by Calibrated Success Inc./Greg Banish)

Fuel Compatibility: Standard Gasolines and Ethanol Flex fuel

Crank Horsepower Rating @58psi fuel pressure, 93 octane, V8 engine with 1 injector per cylinder: 1150hp

Connector: Jetronic (EV1 Deka Body) USCAR (EV6 LSA/LS3,12594512), Multec 2 (17113698)

Flow Rate @43: 1000cc/min, 96lb/hr

High Impedence, 12.5 ohms coil

 *** It is IMPERATIVE when running high flow fuel injectors you run a 10 Micron inline aftermarket fuel filter system!!! Failing to do so will allow debris COMMONLY found in pump gasses into the injector filter/body and begin to alter fuel flow rates and/or cause TOTAL FAILURE of fuel injectors voiding your warranty and damaging your engine***

 

Deka Body Vehicle Fitment:

GM/Chevy:

  • 2.5"-2.75" injector height Manifolds (Truck, TBSS, Flex Fuel) fit with appropriate fuel rail or 1/4"-1/2" spacer and extended hardware. How to: Fuel Rail Spacer

Ford Mustang

  • Bullitt - '08-'09
  • Cobra - '99-'04
  • GT - '05-'10
  • Mach 1 - '03-'04
  • V6 - '99-'04

LSA/LS3/LS7/L99 Body Vehicle Fitment

Chevy:

  • Any LSA Supercharger swapped LS family motor
  • '10-'15 Camaro SS with 6.2 LS3 and L99 engines
  • '14 Camaro Z/28 with 7.0 LS7 engines
  • '08-'13 Corvette with 6.2 LS3 engines
  • '06-'13 Corvette Z06 with 7.0 LS7 engines
  • '13 corvette 427 convertible with 7.0 LS7 engines
  • '09 Pontiac/Holden G8 GXP with 6.2 LS3 engines

Truck Body with Multec 2 plug (OEM PN 17113698)

  • 2001-2007 Chevy, GM, LM4/LM7/L33 Engines,
  • 2001-2007 Avalanche, Escalade, Express 1500/2500, Silverado, Suburban, Tahoe

Truck Body with EV6 Plug (OEM PN 12594512)

  • 2007-2009 LC9/LMG/LMF Engines
  • 2007-2009 Avalanche, Escalade, Express 1500/2500, Silverado, Suburban, Tahoe

EV14 Medium, 48mm Style Fitment

  • GT500 Mustang
  • Dodge SRT 4/8 Engines
  • Hellcats
  • Honda motors with 14mm rail conversion

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods