FABbot AR5/T56/NV3500 Remote Clutch Bleeder

FABbot Remote Clutch Bleeder Line – GM Hydraulic Clutch Bleeding Kit

One-person clutch bleeding made easy for GM vehicles with hydraulic clutch systems.

The FABbot Remote Clutch Bleeder Line is a must-have upgrade for any GM vehicle owner or builder running a hydraulic clutch setup. Designed to simplify the clutch bleeding process, this high-quality bleeder line relocates the slave cylinder bleeder screw from the transmission to an easily accessible location under the hood — right next to the clutch master cylinder reservoir.

No more crawling under the car. No more two-person jobs. No more mess.

---

Key Features:

• Compatible with GM hydraulic clutch systems – ideal for LS swap vehicles and factory configurations

• Remote-mounted bleeder port – makes bleeding your clutch system fast, clean, and easy

• Over 4 feet in length – long enough for flexible routing to your engine bay

• Durable high-performance construction – Teflon inner tube with stainless steel braided outer layer

• High-temp rating – operates from -100°F to +450°F (-73°C to 232°C)

---

How It Works:

1. Connect the bleeder line to your slave cylinder’s bleeder port.

2. Route the line to your engine bay near the clutch master cylinder.

3. To bleed: open the bleeder, submerge the line’s end in the reservoir, and pump the clutch pedal.

4. Close the bleeder – done.

Bleed your hydraulic clutch solo in just a few minutes.

---

Vehicle Fitment:

This clutch bleeder kit is compatible with a wide range of GM vehicles, including:

Chevrolet:

• Camaro (1996–2002)

• Blazer (1996–2001, 2004–2005)

• S10 Pickup (1996–2001)

• Colorado (2004–2012)

• Silverado 1500 / 2500 (1999–2000)

• C/K Series Pickup (1996–2002)

• Tahoe (1996)

• P30 (1996–1999)

GMC:

• Jimmy (1996–2001)

• Sierra 1500 / 2500 (1999–2000)

• Canyon (2004–2012)

• C/K Series Pickup (1996–2002)

• Sonoma (1996–2001)

• Yukon (1996)

• P3500 (1996–1999)

Pontiac:

• Firebird (1996–2002)

Isuzu:

• Hombre (1996–2000)

• i-280 (2006)

• i-290 (2007–2008)

Hummer:

• H3 (2006–2010)

---

Technical Specifications:

• Hose Length: 4+ feet

• Inner Tube: .040" wall extruded Teflon

• Outer Layer: Stainless steel braided single wire

• Operating Temperature: -100°F to +450°F (-73°C to 232°C)

---

Why Choose the FABbot Remote Clutch Bleeder?

This isn't just a convenience mod — it's a time-saving tool that belongs in every GM hydraulic clutch system build. Whether you're bleeding after a transmission swap, clutch replacement, or during routine maintenance, this kit ensures quick, air-free results every time.

---

Order your FABbot Remote Clutch Bleeder today and make GM clutch bleeding a fast, one-person job.

---

 

**Slave Cylinder not included. Must be ordered separately**

****Feel free to call our sales line at 763-670-6941 to check stock****